Backup v1

PostgreSQL natively provides first class backup and recovery capabilities based on file system level (physical) copy. These have been successfully used for more than 15 years in mission critical production databases, helping organizations all over the world achieve their disaster recovery goals with Postgres.

In EDB Postgres for Kubernetes, the backup infrastructure for each PostgreSQL cluster is made up of the following resources:

• WAL archive: a location containing the WAL files (transactional logs) that are continuously written by Postgres and archived for data durability
• Physical base backups: a copy of all the files that PostgreSQL uses to store the data in the database (primarily the PGDATA and any tablespace)

The WAL archive can only be stored on object stores at the moment.

On the other hand, EDB Postgres for Kubernetes supports two ways to store physical base backups:

• on object stores, as tarballs - optionally compressed
• on Kubernetes Volume Snapshots, if supported by the underlying storage class

WAL archive

The WAL archive in PostgreSQL is at the heart of continuous backup, and it is fundamental for the following reasons:

• Hot backups: the possibility to take physical base backups from any instance in the Postgres cluster (either primary or standby) without shutting down the server; they are also known as online backups
• Point in Time recovery (PITR): to possibility to recover at any point in time from the first available base backup in your system

In general, the presence of a WAL archive enhances the resilience of a PostgreSQL cluster, allowing each instance to fetch any required WAL file from the archive if needed (normally the WAL archive has higher retention periods than any Postgres instance that normally recycles those files).

This use case can also be extended to replica clusters, as they can simply rely on the WAL archive to synchronize across long distances, extending disaster recovery goals across different regions.

When you configure a WAL archive, EDB Postgres for Kubernetes provides out-of-the-box an RPO <= 5 minutes for disaster recovery, even across regions.

Cold and Hot backups

Hot backups have already been defined in the previous section. They require the presence of a WAL archive and they are the norm in any modern database management system.

Cold backups, also known as offline backups, are instead physical base backups taken when the PostgreSQL instance (standby or primary) is shut down. They are consistent per definition and they represent a snapshot of the database at the time it was shut down.

As a result, PostgreSQL instances can be restarted from a cold backup without the need of a WAL archive, even though they can take advantage of it, if available (with all the benefits on the recovery side highlighted in the previous section).

In those situations with a higher RPO (for example, 1 hour or 24 hours), and shorter retention periods, cold backups represent a viable option to be considered for your disaster recovery plans.

Object stores or volume snapshots: which one to use?

In EDB Postgres for Kubernetes, object store based backups:

• always require the WAL archive
• support hot backup only
• don't support incremental copy
• don't support differential copy

VolumeSnapshots instead:

• don't require the WAL archive, although in production it is always recommended
• support cold backup only (currently)
• support incremental copy, depending on the underlying storage classes
• support differential copy, depending on the underlying storage classes

Which one to use depends on your specific requirements and environment, including:

• availability of a viable object store solution in your Kubernetes cluster
• availability of a trusted storage class that supports volume snapshots
• size of the database: with object stores, the larger your database, the longer backup and, most importantly, recovery procedures take (the latter impacts RTO); in presence of Very Large Databases (VLDB), the general advice is to rely on Volume Snapshots as, thanks to copy-on-write, they provide faster recovery
• data mobility and possibility to store or relay backup files on a secondary location in a different region, or any subsequent one
• other factors, mostly based on the confidence and familiarity with the underlying storage solutions

The summary table below highlights some of the main differences between the two available methods for storing physical base backups.

See the explanation below for the notes in the above table:

1. WAL archive must be on an object store
2. Hot backup is not available yet for volume snapshots, and it is planned for version 1.22; however, considering that cold backup is taken by fencing temporarily a standby, the operation does not induce any downtime for your write applications
3. If supported by the underlying storage classes of the PostgreSQL volumes
4. Snapshot recovery can be emulated using the bootstrap.recovery.recoveryTarget.targetImmediate option

Scheduled backups

Scheduled backups are the recommended way to configure your backup strategy in EDB Postgres for Kubernetes. They are managed by the ScheduledBackup resource.

The schedule field allows you to define a six-term cron schedule specification, which includes seconds, as expressed in the Go cron package format.

This is an example of a scheduled backup:

apiVersion: postgresql.k8s.enterprisedb.io/v1
kind: ScheduledBackup
metadata:
  name: backup-example
spec:
  schedule: "0 0 0 * * *"
  backupOwnerReference: self
  cluster:
    name: pg-backup

The above example will schedule a backup every day at midnight because the schedule specifies zero for the second, minute, and hour, while specifying wildcard, meaning all, for day of the month, month, and day of the week.

In Kubernetes CronJobs, the equivalent expression is 0 0 * * * because seconds are not included.

You can choose whether to schedule a backup on a defined object store or a volume snapshot via the .spec.method attribute, by default set to barmanObjectStore. If you have properly defined volume snapshots in the backup stanza of the cluster, you can set method: volumeSnapshot to start scheduling base backups on volume snapshots.

ScheduledBackups can be suspended, if needed, by setting .spec.suspend: true. This will stop any new backup from being scheduled until the option is removed or set back to false.

In case you want to issue a backup as soon as the ScheduledBackup resource is created you can set .spec.immediate: true.

On-demand backups

To request a new backup, you need to create a new Backup resource like the following one:

apiVersion: postgresql.k8s.enterprisedb.io/v1
kind: Backup
metadata:
  name: backup-example
spec:
  method: barmanObjectStore
  cluster:
    name: pg-backup

In this case, the operator will start to orchestrate the cluster to take the required backup on an object store, using barman-cloud-backup. You can check the backup status using the plain kubectl describe backup <name> command:

Name:         backup-example
Namespace:    default
Labels:       <none>
Annotations:  API Version:  postgresql.k8s.enterprisedb.io/v1
Kind:         Backup
Metadata:
  Creation Timestamp:  2020-10-26T13:57:40Z
  Self Link:         /apis/postgresql.k8s.enterprisedb.io/v1/namespaces/default/backups/backup-example
  UID:               ad5f855c-2ffd-454a-a157-900d5f1f6584
Spec:
  Cluster:
    Name:  pg-backup
Status:
  Phase:       running
  Started At:  2020-10-26T13:57:40Z
Events:        <none>

When the backup has been completed, the phase will be completed like in the following example:

Name:         backup-example
Namespace:    default
Labels:       <none>
Annotations:  API Version:  postgresql.k8s.enterprisedb.io/v1
Kind:         Backup
Metadata:
  Creation Timestamp:  2020-10-26T13:57:40Z
  Self Link:         /apis/postgresql.k8s.enterprisedb.io/v1/namespaces/default/backups/backup-example
  UID:               ad5f855c-2ffd-454a-a157-900d5f1f6584
Spec:
  Cluster:
    Name:  pg-backup
Status:
  Backup Id:         20201026T135740
  Destination Path:  s3://backups/
  Endpoint URL:      http://minio:9000
  Phase:             completed
  s3Credentials:
    Access Key Id:
      Key:   ACCESS_KEY_ID
      Name:  minio
    Secret Access Key:
      Key:      ACCESS_SECRET_KEY
      Name:     minio
  Server Name:  pg-backup
  Started At:   2020-10-26T13:57:40Z
  Stopped At:   2020-10-26T13:57:44Z
Events:         <none>

Backup from a standby

Taking a base backup requires to scrape the whole data content of the PostgreSQL instance on disk, possibly resulting in I/O contention with the actual workload of the database.

For this reason, EDB Postgres for Kubernetes allows you to take advantage of a feature which is directly available in PostgreSQL: backup from a standby.

By default, backups will run on the most aligned replica of a Cluster. If no replicas are available, backups will run on the primary instance.

If you prefer to always run backups on the primary, you can set the backup target to primary as outlined in the example below:

apiVersion: postgresql.k8s.enterprisedb.io/v1
kind: Cluster
metadata:
  [...]
spec:
  backup:
    target: "primary"

When the backup target is set to prefer-standby, such policy will ensure backups are run on the most up-to-date available secondary instance, or if no other instance is available, on the primary instance.

By default, when not otherwise specified, target is automatically set to take backups from a standby.

The backup target specified in the Cluster can be overridden in the Backup and ScheduledBackup types, like in the following example:

apiVersion: postgresql.k8s.enterprisedb.io/v1
kind: Backup
metadata:
  [...]
spec:
  cluster:
    name: [...]
  target: "primary"

In the previous example, EDB Postgres for Kubernetes will invariably choose the primary instance even if the Cluster is set to prefer replicas.

• On this page
• WAL archive
• Cold and Hot backups
• Object stores or volume snapshots: which one to use?
• Scheduled backups
• On-demand backups
• Backup from a standby